| |
Rittal Rimatrix5
Datacenter Security Solutions
Rittal's CMC-TC security management system
protects against unauthorized access, vandalism
and environmental factors such as heat, humidity,
smoke and vibration. CMC-TC data center
security solution offers a modular monitoring
system with optimum protection for IT racks
and rooms. Due to its modular concept the system
can optimally be adjusted to the individual
requirements of the existing infrastructure.
Extension and retrofitting are also possible.
Thus, the system offers optimum investment security
for your IT infrastructure. The interface is
based on the network technology standard. With
Ethernet via TCP/IP the CMC-TC offers via SNMP,
the connection to Network Management Systems
(NMS). It also includes an own web server for
convenient operation via an Internet browser
and support standards like RS232, Telnet, SSH,
FTP or SMTP.
The CMC-TC system allows monitoring applications
to be configured cost-effectively and in a targeted
manner. The processing unit (PU) with network
interface forms the basis. The sensor
units are combined with sensors to form the
PU. This determines the function. The PU may
optionally be operated via CMC-TC master for
enhanced performance. The finishing touches
are provided by the plug & play concept with
automatic sensor detection and configuration.
Master Unit
The master system may be connected between
the processing unit and the user network. There
are ten 10BaseT network inputs available for
the processing units (PU). The PUs transmit
all monitoring- related data and messages to
the master system via TCP/IP, SNMP.
Benefits of using the
Master Unit are:
- Centralized administration
- Network connection 10/100BaseT
- Central web server for configuration
- Local administration via PS2/
VGA console
- Logging function for alarm messages
- Link for USB camera
- Free function selection for
monitoring
- Ideal for large data centers
- Web access via SSL 3.0 128-bit
encryption
- Remote administration via SSH
|
 |
CMC-TC Processing
Unit (PU)
The processing unit forms the basis of the
CMC-TC system. This unit is required for every
monitoring application. The benefits include:
- Selectable monitoring functions
- Sensor/actuator ports extendible
- TCP/IP SNMP network connection
- Integral web server for configuration
- Automatic menu generation
- Simple installation based on
the plug & play system
- Alarm continues to record even
in the event of a network failure
- Built-in real-time clock
- May be used via power pack for
115/230 V AC or 48 V D
- Choice of mounting on the enclosure
frame or 482.6 mm (19") mounting
angles
- The protocol for the master/
slave system is TCP/IP SNMP
- May be used for large data centers
or small individual applications
|
 |
CMC-TC Sensor
Units
I/O Unit
This sensor unit allows alarm and status
messages and measurements to be forwarded
or remote actions to be executed via
relay output modules.Access Unit
With this sensor unit, one or two door
zones may be released for access via
the network, or a personalized opening
via a code (e.g., smartcard reader)
may be initiated.
Climate Unit
A temperature control circuit is
installed with this sensor unit. Temperature
set points are set via the PU, and these
are compared with the actual temperature.
Fan Control System
The Fan Control System regulates and
controls the speed of up to 6 fans.
This helps to save electricity, reduce
the noise level of the fans and extend
the service life of the fans.
|
 |
|
|
|
Click here for a Rittal Rimatrix5 Project Evaluation
|
|
