| |
Powerware Flywheel Battery-free Energy Storage System
Wherever maximum productivity and system availability is critical, the Powerware PF2 battery-free energy flywheel storage system bridges the power gap, acting as a backup power or battery backup source during power quality or utility disturbances and acts as an effective UPS battery enhancement, battery backup system, or UPS battery replacement for traditional systems.
The Powerware PF2, a DC battery-free energy flywheel storage technology, is an integrated motor-generator-flywheel that stores kinetic energy in a constantly spinning, quiet, low friction steel disc. Compared to traditional UPS battery backup systems, the Powerware PF2 dramatically reduces space requirements, temperature restrictions, UPS battery replacement cycles, and maintenance costs while improving UPS system reliability and operational integrity.
Powerware Flywheel Features and Benefits: Flexible sitting Reduced maintenance cost Over 20 years of useful life High power density in a small footprint Non-toxic and non-corrosive Real-time monitoring of over 25 system parameters Only two terminal connections Remote monitoring by PowerVision software Maximum Availability Powerware PF2 can parallel up to 8 flywheels to increase ride-through time or provide redundancy N+1 upgradeable Fast recharge time (under 150 seconds) Long, useful life Soft-start UPS integration
Maximum Reliability Self-diagnostics Remote notification (email and /or paging) Remote monitoring (network and/or modem) LCD monitor/control panel Microprocessor-based monitoring system Alarm status contacts Log file store up to 2000 events
Maximum Performance High power density (very small footprint) 99% efficient Quiet operation No special facility requirements Low maintenance cost Adjustable voltage setting Battery hardening capability On-board DC disconnect Simple plug and play installation
Powerware Flywheel Technical Specifications: | Input Specifications | | | | | Float voltage range | | | 400 to 600 volts DC | | Minimum charging current required | | | 15 ADC (250 kW)
30 ADC (500 kW) | | Output Specifications | | | | | Adjustable nominal discharge voltage range | | | 360 to 550 volts DC | | Maximum rated power | | | between 480 VDC and 550 VDC | | DC voltage regulation | | | ±1% steady state | | DC ripple | | | <2% | | Environmental Specifications | | | | | Operating temperature | | | -20°C to 40°C | | Non-operating temperature | | | 0°C to 70°C | | Relative humidity | | | <95% non-condensing | | Altitude | | | Up to 4,000ft (1220 meters) with no derating | | Audible noise | | | 72 dBA at 1 meter; in accordance with ISO 7779 | | Typical heat dissipation | | | <3 kW or 10,250 BTU (250 kW) or
<5 kW or 17,050 BTU (500 kW) | | System Dimensions | | | 42”W x 34”D x 78”H
(107 cm. W x 86 cm. D x 198 cm. H) | | Cabinet Footprint | | | 10 sq.ft. (.93 sq. m.) (no rear or side access required) | | Weight | | | 250 kW - 3,800 lbs. (1724 kgs.)
500 kW - 6,000 lbs. (2727 kgs.) |
| Model | UPS Output | Percent kW | Output kW | | 9315-160 | 100 kVA | 50%
75%
100% | 40
60
80 | | | 130 kVA | 50%
75%
100% | 52
78
104 | | | 160kVA | 50%
75%
100% | 64
96
128 | | 9315-225 | 225 kVA | 50%
75%
100% | 90
135
180 | | 9315-300 | 300kVA | 50%
75%
100% | 120
180
240 | | 9315-500 | 400 kVA | 50%
75%
100% | 160
240
320 | | | 500 kVA | 50%
75%
100% | 200
300
400 | | 9315-750 | 600kVA | 50%
75%
100% | 250
375
500 | | | 750kVA | 50%
75%
100% | 300
450
600 |
| | Powerware Three-Phase UPS System | | | | | Eaton Powerware UPS Appliance | Power Range | Topology | | Powerware BladeUPS
Powerware BladeUPS System expands power protection from 12 kW to 60 kW in a single industry-standard 19" rack. | 180 to 265 Vac, 311 to 519 Vac | Online, Double-conversion on Demand |  |
| | | | | |
| |
