Raritan Dominion PX Rack Power Distribution Units
Dominion PX Feature Snapshot:
- Multiple Configurations - Outlet type and number, AMP, and Current configurations available in various form factors
- Circuit breakers - instead of fuses
- Outlet level control - independent on/off with user configurable power sequencing
- Local Monitoring - local LED display for hot/cold state, current & voltage metering with alert for overload condition
- Secure Access - 256-bit encryption (AES) in hardware with access via HTTP/HTTPS/SSH plus built-in Firewall and per outlet access control list
- Flexible Remote Access Options - simultaneously access HTML GUI via serial & over IP, Server Management Interface (IPMI), UNIX-like Console interface via serial connector or telnet/SSH
- Proactive Metering/Monitoring -
- Per-Outlet Power Metering: Average power consumption, Real RMS power, RMS voltage & current, Apparent power
- Monitoring Auto Alerts: 2 stages configurable per outlet with buzzer alarm, Email and SNMP traps
Have Questions? Call 1-800-638-2638.
The Raritan Dominion PX allows users to remotely power on/off, reboot, monitor and control power in the data center. Standard features include outlet-level power metering, secure IP access (256-bit AES encryption), user-configurable power sequencing, and the ability to set warning/shutoff thresholds at the outlet and unit levels. Additionally, the outlet on/off status is retained in the event of power loss restoring power only to those receptacles that were on before the outage. Outlet grouping is available enabling power cycling to servers with redundant power supplies. Raritan's IP clustering feature enables users to daisy chain power strips together.
These intelligent PDUs can be managed with a user-friendly browser interface, or with other interfaces/protocols that might be preferred by IT administrators, including SSH, Telnet, IPMI, and SMASH CLI. The Dominion PX also supports advanced authorization options, including strong password, outlet-level permissions, and support for LDAP/S, RADIUS, TACACS+, and Active Directory.
The Dominion PX can be used as a standalone power management solution or integrated with Raritan Access Solutions such as Dominion KX, SX, or KSX as well as the Paragon II. For centralized management, the PDUs and Access Solutions can be managed through Raritan's CommandCenter Secure Gateway.
The Dominion PX intelligent PDUs are available in 1U, 2U, and Zero U form factors and 8, 12, or 20 available receptacles. Both NEMA and IEC plug-type combinations are available, and the units are certified by most major agencies worldwide.
Below is a sampling of the Dominion PX Screenshots:
Outlets Display
Turn individual outlets OFF and ON and monitor the individual outlets and the rack PDU overall. Each outlet features an icon whose color and flashing status indicates the status of the outlet.
Outlet Details
Displays the current, voltage and power values and status of a specific outlet in real time, and allows the user to power on, off and power cycle the outlet.
Alert Configuration Window
Allows users to set event policies, for example, configure Dominion PX to send an alert if a particular outlet's current draw exceeds the critical threshold set by using the Outlet Setup Window.
The Raritan Dominion PX offers many Features & benefits:
Distribution of power:
- 8, 12, 20 outlets: NEMA and IEC
- Amp/Current Options: 15A/120V, 20A/120V, 30A/120V, 30A/208V, Custom configurations available
- Compliant to new UL 60950 3rd edition
- Circuit breakers instead of fuses
- Various form factors (0U, 1U, 2U)
Remote Management Control
- Independent Outlet Control: On/off, Reboot
- Power sequencing: User configurable, Delay per outlet, Outlet sequence
- Retains state of the outlet before an outage
- Outlet on/off is controlled from the software
- Local LED console for metering current and voltage (per outlet)
- Outlet Cold/Hot status on each outlet
- LED alert in case of overload
Access/Security
- Secure Access
- 256-bit encryption (AES) in hardware
- HTTP/HTTPS/SSH
- Operates securely in a standalone mode
- Integrates to external authentication/authorization services
- Built-in Firewall
- Built-in access control list
- User rights per outlet
- Flexible Remote Access Options for switching, metering, data collection and monitoring:
- Convenient HTML GUI
- Can access via serial and IP simultaneously
- Server Management Interface (IPMI)
- UNIX-like Console interface via serial connector or telnet/ssh (compatible with SMASH server management )
Proactive Monitoring
- Per-Outlet Power Metering: Average power consumption, Real RMS power, RMS voltage & current, Apparent power
- Monitoring Auto Alerts:
- 2 stages of thresholds: Yellow and red, Both configurable by the user per outlet
- Buzzer alarm
- SNMP traps
- Port for External Sensors
Consolidated Management
- Intuitive HTML GUI with IP connection
- Consistent with other Raritan interfaces
- "Per outlet" view and control
- User rights per outlet
Raritan Dominion PX Outlet-Level PDU Part Numbers:
| Voltage | Installation | Outlets | 15 Amp | 16 Amp | 20 Amp | 30 Amp | 32 Amp | 35 Amp |
| 120 | 1U Horizontal | 8 | DPXR8-15 | |||||
| 120 | Vertical | 12 | DPXS12-20 | DPCS12-30L | ||||
| DPCS12-20L | ||||||||
| 120 | Vertical | 20 | DPXS20-20* | DPXS20-30L | ||||
| DPXS20-20L | ||||||||
| 120 | 2U Horizontal | 20 | DPXR20-20 | DPXR20-30L | ||||
| DPXR20-20L | ||||||||
| 208 | 1U Horizontal | 8 | DPCR8A-20L6 | |||||
| 208 | Vertical | 16 | PX-5384* | |||||
| 208 | Vertical | 20 | DPCS20A-20L6 | DPCS20A-30L6 | ||||
| DPXS20A-30L6 | ||||||||
| 208 | 2U Horizontal | 20 | DPXR20A-20L6* | DPXR20A-30L6 | ||||
| 208 | Vertical | 24 | PX-5496* | |||||
| 230 | 1U Horizontal | 8 | DPCR8A-16 | |||||
| 230 | Vertical | 12 | DPCS12A-16 | |||||
| 230 | Vertical | 20 | DPCS20A-16 | DPCS20A-32 | ||||
| 230 | 2U Horizontal | 20 | DPXR20A-16 | DPCR20A-32 | ||||
| 208~240 3PH | Vertical | 24 | PX-5508* | PX-5520* | PX-5532 | |||
| PX-5522 | PX-5534 | |||||||
| PX-5524* | PX-5535* | |||||||
| 400 3PH | Vertical | 12 | PX-5314* | PX-5318* | ||||
| 400 3PH | Vertical | 24 | PX-5528* |
Raritan Dominion PX Monitored PDU Part Numbers:
| Voltage | Installation | Lines | 16 Amps per phase | 20 Amps per phase | 30 Amps per phase | 32 Amps per phase |
| 100-240 | 1U | 2 | PX-3211* | PX-3211* | PX-3220* | PX-3220* |
| PX-3220* | PX-3220* | |||||
| 100-240 | 1U | 4 | PX-3411* | PX-3411* | PX-3420* | PX-3420* |
| PX-3420* | PX-3420* |
*PDU part numbers marked with an * are built to order models and there is a required minimum order quantity of 10. There is a standard lead time of 3-5 weeks.
Note 1: Px-3211 and PX-3411 operate at either 16A or 20A depending on the cord set chosen.
Note 2: PX-3220 and PX-3420 operate at up to 40A (32A rated) per line depending on the wiring in the data center.
Purchasing Options
Is the Raritan Dominion PX the best Power Distribution solution for your power needs?
Our engineers can help you select the best solution for your power needs.
Click here or Call 1-800-638-2638 for a free power project consultation.
