Avocent DSR800
Avocent DSR800 KVM over IP Solutions

Avocent DSR800 Features and Benefits
The Avocent DSR800 KVM over IP switch is an 8-port appliance that gives you remote access and control capability of your servers and other network devices.

The Avocent DSR800 KVM switch is designed for lower-density applications and distributed locations.

• A KVM network appliance that combines digital and analog technology
• Features connections for eight servers in a 1U chassis
• Provides analog access at the rack, and digital IP access from anywhere
• Allows you to troubleshoot or reboot a server no matter where you are
• Features DSRIQ CAT 5 cabling to reduce cable bulk and provide connectivity from the DSR800 switch to your servers
• Supports all major server platforms and VT100 serial-based devices
• Flash-upgradeable for future firmware compatibility
• The patented OSCAR? on-screen graphical user interface provides local access at the rack
• Works with Avocent DS management software for secure, centralized control of all connected devices:
  • DSView? 2 software to access all devices via a standard IP connection
  • DSView 2 software also creates and configures your network access environment
  • DSWebview software for browser-based remote access to devices
  • DSAuth software for user authentication/permissions, topology and per-device contact information

Avocent DSR800 Specifications

Avocent DSR800-AM Mechanical		Height		1.75 in. (4.45 cm)
		Width		17.00 in. (43.18 cm)
		Depth		11.00 in. (27.94 cm)
		Weight		8 lbs. (3.6 kg) without cables
Avocent DSR800-AM Environmental		Operating Temp		32 to 104 degrees F (0 to 40 degrees C)
		Storage Temp		-4 to 158 degrees F (-20 to 70 degrees C) Humidity: 10 to 95%, non-condensing
Avocent DSR800-AM Power		Operating Voltage		100 to 240 VAC
		Power Frequency		50 - 60 Hz Auto Sensing
		Input		40W maximum
Avocent DSR800-AM Supported Hardware		Computers		PS/2, Sun and USB
		Monitors		VGA, SVGA (XGA, XGA-II with adaptor) Maximum resolution Local Port DSR800, DSR1010 & DSR2010 only: 1600 x 1280 @75Hz, Digital Port Maximum Input Resolution 1280X1024, 75Hz
		Peripherals		PS/2 keyboard, PS/2 mouse, IntelliMouse (PS/2 only), IBM Scrollpoint, Logitech Mouseman+, Logitech Marble Plus, Logitech Marble FX and Kensington Expert mouse Other devices: VT100 serial-based devices
Avocent DSR800-AM Standards		Approved Agency		EN55022 Class A,EN55024,EN6200-3-2,EN6100-3-3,FCC15 Class A, VCCI Class A, IEC950,EN60950,UL 1950 third edition, CSA C22.2 No.950

Avocent DSR800 Diagram

Click here for DSView 3 Maintenance Information

Click here for a Free Avocent DSR KVM over IP Project Evaluation

Avocent DSR800 Downloads & Manuals