Sentry PTPD-VL08
The Sentry PDU is a half-rack enclosure
for power distribution of up to 30-Amps and is ideal
for use in data-center, industrial and laboratory environments.
This intelligent rack PDU power strip features an Input
Current Monitor built-in to the enclosure to display
the current load in amps on each power circuit. The
Sentry PDU-VL08 features eight outlet receptacles and
is available either as 110 or 208 VAC. An Audible alarm
indicates an overload warning and two 15-amp circuit
breakers provide overload protection.
-
30-Amp power distribution
-
Qty 8 output receptacles
-
Half-rack form factor
-
Input Current monitor precisely
measures and reports the current draw (in amps)
that servers and network devices are drawing on
the power circuit. A LED digital display indicator
on the front panel of the Power Tower reports the
current for on-site measurement.
-
Intelligent rack PDU power strip
with LED amp display.
-
Qty 2 15-Amp circuit breaker protection
Sentry PTPD-VL08 Key Features and
Benefits:
Sentry PTPD-VL08 True RMS Input Current
Monitoring: Input Current Monitoring in Sentry power
products is reported as the cumulative load (in amps)
on each power circuit so that data center managers can
obtain the data they need to plan their power requirements
and to monitor power to their IT equipment. Input Current
is reported in Amps and can be viewed locally on the
enclosure via an LED Digital Display and remotely, when
applicable, via the firmware interface.
Sentry PTPD-VL08 LED Digital Display
Input Current Monitor: Easy viewing display on the
face of the enclosure that reports the True RMS Power
Monitoring of the aggregate load on the power circuit
(in amps). The Input Current Display allows installation
engineers to verify the real-time current draw on the
power circuit. This eliminates the guesswork of estimating
the current draw and prevents the costly mistake of:
1) overestimating and requiring extra power drops installed
or 2) underestimating and overloading a circuit - putting
the enter cabinet at risk if a circuit breaker at the
main PDU trips.
Sentry PTPD-VL08 Zero U Enclosure:
A vertical enclosure that occupies Zero Vertical
U of rack space in the equipment cabinet. It mounts
on the back rails or in the cavity space of the cabinet.
Sentry PTPD-VL08 20-amp Power Input
Support: 20-amp Power Input Support. IEC320/C20
power inlet receptacles supports any power cord with
IEC320/C19 power connector (PTCORD-XX).
Sentry PTPD-VE18 30-Amp Power Input
Support: 30-amp Power Input Support. Hard-wired
with 10' cord and appropriate L5-30 or L6-30 plug type.
Sentry PTPD-VE18 Overcurrent Alarm:
Audible (local) alarm sounds when defined maximum current
load (amps) is exceeded.
|
Sentry PTPD-VL08
Specifications |
|
Item # |
Description |
Maximum
Input/
Output |
Maximum
Output per Receptacle |
Receptacle
Type |
Dimensions |
|
PTPD-VL08-1 |
Sentry PDU,
Vertical
8 Outlets
Circuit breakers @ 1-4 & 5-8
Input Current Display
Audible Overload Alarm |
30-Amp
110 VAC |
20-Amp |
5-20R |
33"H
2.25" D
1.75" W
includes mounting brackets |
|
PTPD-VL08-2 |
Sentry PDU,
Vertical
8 Outlets
Circuit breakers @ 1-4 & 5-8
Input Current Display
Audible Overload Alarm |
30-Amp
208 VAC |
20-Amp |
5-20R |
33"H
2.25" D
1.75" W
includes mounting brackets |
ServerTech Sentry PTPD-VL08 Downloads & Manuals
