Sentry PTPD-VE18
The Sentry PDU-VE18 is a highly flexible
smart power strip designed for server cabinets. It uniquely
features a voltage select function, so that the smart
power strip can operate at either 110 VAC or 208 VAC.
It is a high-density PDU with 18 outlet receptacles
and distributes up to 30-Amps. It features an Input
Current Monitor built-in to the enclosure to display
the current load in amps on each power circuit. The
Sentry PDU-18 smart power strip features 18 IEC C13
receptacles.
-
Voltage Select: 110 VAC or 208 VAC
-
30-Amp power distribution
-
Qty 18 10-Amp IEC C13 output receptacles
-
Input Current monitor precisely
measures and reports the current draw (in amps)
that servers and network devices are drawing on
each power circuit. A LED digital display indicator
on the front panel of the Power Tower reports the
current for on-site measurement.
-
Qty 3 10-Amp circuit breaker protection
Sentry PTPD-VE18 Key Features and
Benefits:
Sentry PTPD-VE18 True RMS Input Current
Monitoring: Input Current Monitoring in Sentry power
products is reported as the cumulative load (in amps)
on each power circuit so that data center managers can
obtain the data they need to plan their power requirements
and to monitor power to their IT equipment. Input Current
is reported in Amps and can be viewed locally on the
enclosure via an LED Digital Display and remotely, when
applicable, via the firmware interface.
Sentry PTPD-VE18 Telnet Management:
Telnet is a user command and an underlying TCP/IP
protocol for accessing remote computers.
Sentry PTPD-VE18 LED Digital Display
Input Current Monitor: Easy viewing display on the
face of the enclosure that reports the True RMS Power
Monitoring of the aggregate load on the power circuit
(in amps). The Input Current Display allows installation
engineers to verify the real-time current draw on the
power circuit. This eliminates the guesswork of estimating
the current draw and prevents the costly mistake of:
1) overestimating and requiring extra power drops installed
or 2) underestimating and overloading a circuit - putting
the enter cabinet at risk if a circuit breaker at the
main PDU trips.
Sentry PTPD-VE18 20-amp Power Input
Support: 20-amp Power Input Support. IEC320/C20
power inlet receptacles supports any power cord with
IEC320/C19 power connector (PTCORD-XX).
Sentry PTPD-VE18 30-Amp Power Input
Support: 30-amp Power Input Support. Hard-wired
with 10' cord and appropriate L5-30 or L6-30 plug type.
Sentry PTPD-VE18 Voltage Select Feature:
User-definable voltage level, select either 110VAC or
208VAC.
|
Sentry PTPD-VE18
Specifications |
|
Item # |
Description |
Maximum
Input/Output |
|
PTPD-VE18-0-05
(Discontinued) |
Sentry PDU
Vertical 18 Outlets
ABC Fuses @ 1-6, 7-12, 13-18
Input Current Display
Audible Alarm |
30-Amp
110 VAC |
|
PTPD-VE18-0-06
(Discontinued) |
Sentry PDU
Vertical 18 Outlets
ABC Fuses @ 1-6, 6-12, 13-18
Input Current Display
Audible Alarm |
30-Amp
208 VAC |
Dimensions
1.75"W
2.25"D
66" H
includes mounting brackets |
Communications
Interface
RS-232 to set overload warning |
Receptacle
Type
IEC C13 |
Maximum
Output Per Receptacle
10-Amp |
ServerTech Sentry PTPD-VE18 Downloads & Manuals
