Rose Electronics UltraConsole
|
|
|
|
Rose Electronics 8-Port UltraConsole
|
|
Rose UltraConsole Features and Benefits:
Control PC, Sun, UNIX, Linux, USB, and serial devices
from a single console station
Powerful and expandable, yet low cost
Plug-in expansion cards and the unit's modular design
makes it simple to install, expand, and maintain
Uses UltraCable for superior cable management
Video resolution up to 1600 x 1280
On-screen menu informs you of connection status
between units in an expanded system
Multi-lingual Menu (English, French, German, Spanish,
Italian, Portuguese)
Pre-configuration feature allows installation without
powering down most servers
Security system with user ID, password and profile
prevents unauthorized configuration and controls computer
access
Status screen displays inter-unit connections, communication,
computer power, and other system information
Front panel indicators show which port is selected
Features push-button computer selection
Free firmware upgrades for product enhancements
and new software features available
Made in the USA
Rose UltraConsole Advantages:
The UltraConsole represents the
latest in KVM switching technology at affordable prices.
The UltraConsole allows for a central user station to
connect to eight computers per chassis, expandable to
as many as 1,000 computers or serial devices.
The UltraConsole series is also
available in 1 x 4 and 1 x 16 models. Units easily connect
together with bus cables to make a seamless and truly
scalable KVM solution.
The advanced design of the UltraConsole uses networking
communication technology to reduce cost, eliminate single
points of failure, and increase reliability.
The on-screen menus make configuring, monitoring, and
installation easy with on-screen instructions and help.
Use the on-screen menus to name computers, select computers,
view connections, assign users, configure system security,
and other features.
The UltraConsole provides serial support to access computers,
routers, Ethernet hubs, UNIX devices and more. It can
perform as a “VT100/VT220” terminal emulator with an
eight-page scroll buffer.
Local monitor connection, security, flash memory, system
status and many other features ensure that the UltraConsole
will streamline your data center or server room and
provide a central access point for your system.
Rose UltraConsole Typical Application
Rose UltraConsole Diagram
Installation
UltraConsole is easy to install. You simply connect
your computers and a KVM to the UltraConsole ports.
Configure each switch’s address and connect the switches
together with the expansion cables. Access the onscreen
menu with a simple keystroke, configure settings such
as CPU names and security, and save it in flash memory.
Operation
Tailor UltraConsole by configuring the level of
security that you desire. You can auto-assign security
settings to a console station or require users to log
into the switch with a user ID and password. The user
profile grants access rights to designated computers
and controls other characteristics. Use simple keyboard
commands to access computers and view system status.
Helpful screen messages indicate the status of all connections.
To allow maximum versatility, users can connect in four
different modes: view, share, control, and private.
On-Screen Display
UltraConsole excels with its on-screen menu system.
The intuitive interface uses pop-up menus to make selections.
User-friendly help lines are shown for each item. The
interface can be programmed for English, French, German,
Spanish, Italian, or Portuguese. You can easily configure
CPU names, security, appearance, and many other features.
Serial Devices
The UltraConsole’s OSD is so powerful that it is
actually a color VT220 terminal emulator. You can configure
any computer port to be serial. When you connect to
a serial device, you get a 24x80 screen with two status
lines. You can access the serial device just as if you
were connected with a terminal. Linux serial ports will
show directory lists in color.
Flash Memory
To support the latest devices, UltraConsole contains
flash memory. We provide free, lifetime firmware upgrades.
Keyboard and
Mouse
UltraConsole fully emulates the keyboard and mouse.
It works on all major operating systems such as Windows,
Solaris, Linux, UNIX, SGI, and OSX. Use any combination
of PS/2, USB, and Sun including PS/2 wheel and serial
mice. USB (PC, Apple, and Sun) and serial mouse are
for the computer side only, not on the KVM side. It
is compatible with European and Asian keyboard languages.
|
Rose Ultraconsole Specifications |
| Dimensions
|
16.7”W x 4.85”D
x 1.75”H |
| |
42.4W x 12.3D
x 4.4H (cm) |
| Weight
|
4 lbs / 1.8kg |
| Connectors |
|
| Power |
IEC32 |
| CPU/KVM |
DB25F |
| Expansion |
DB15M/F |
| |
RS232 – RJ12
(6-pin) |
| Power |
90 – 240 VAC,
auto-switching |
| Bandwidth |
250MHz |
| Video sync |
HV sync, composite,
sync-on-green |
| Controls |
Power on,off
switch, port selector switches |
| Indicators |
Chassis Power,
CPU select, CPU power |
| Chassis
|
Electro galvanized
steel, black powder coated (Top cover) |
| Environmental |
0°-45°C, 5%-80%
non-condensing RH |
| Approvals |
FCC, VCCI,
UL, cUL, TUV, CE |
|
Corporate
& Government Discount Pricing is available at
1-800-638-2638
|
|
Rose UltraConsole Product Description |
Part Number |
| UltraConsole,
1x8 Console Switch, Multi-platform+Serial Support,
B Chassis 1U |
UC1-1X8U |
| UltraConsole,
Expansion card option, DB15 Style |
UMC-EXP2 |
| UltraMatrix,
2 Port Bus Expansion Card option, RJ45 Style |
UMC-EXP2RJ |
| Rack Mount
kit, 1U, B Chassis (xx = 19", 23", or 24") |
RM-UBxx |
|
Corporate
& Government Discount Pricing is available at
1-800-638-2638
|
|
|
