Raritan ConsoleSwitch SCS232 -
Discontinued
|
|
Raritan ConsoleSwitch SCS232 |
Raritan ConsoleSwitch SCS232
Convenient serial access to
data center devices
ConsoleSwitch™ SCS232 is a serial solution
that enables network administrators to centrally manage multiple UNIX
servers, as well as LAN/WAN components, including routers, switches, and
other network infrastructure devices accessible through serial console
ports. Contained in a convenient, rack mountable 1U form factor,
ConsoleSwitch SCS232 provides out-of-band connectivity to 32 serial
console ports from two user stations. Built-in data buffers save the
most recent console output from each connected device, making it easier
for the administrator to troubleshoot failures. And unlike other serial
management devices, ConsoleSwitch SCS232 does not emit inadvertent
“break” signals that can cause unintentional rebooting.
Raritan ConsoleSwitch SCS232 basic configuration
Raritan ConsoleSwitch SCS232
Flexible out-of-band management
Serial console connectivity is the only
out-of-band management solution for most existing data center equipment,
such as network infrastructure devices. With ConsoleSwitch SCS232 the
administrator may access devices on the LAN, even when the LAN is down.
ConsoleSwitch SCS232 enables centralized local response to the failure
of these critical devices, without the need to connect each to a dumb
terminal or a PC. And all serial ports are also accessible remotely via
dial-up modem.
Raritan ConsoleSwitch SCS232 (Rear View)
Click
here for a Free
Serial / Console Management Switch Project Evaluation
Raritan ConsoleSwitch SCS232
Seamless interface to Raritan's enterprise-class Paragon
ConsoleSwitch SCS232 is Paragon Ready™,
adding seamless, integrated serial console connectivity to
award-winning, Cat5-based KVM access to servers. When ConsoleSwitch
SCS232 is connected in a Paragon-centric environment, the network
administrator is able to achieve control of both serial and
GUI-interface devices through a single integrated system, independent of
the network.
Raritan ConsoleSwitch SCS232 configuration with
Raritan Paragon
Raritan ConsoleSwitch SCS232
Features:
- Raritan ConsoleSwitch SCS232 has a
simple plug and play installation
- Raritan ConsoleSwitch SCS232 Remote
access—one modem port to connect to dial-up modem
- Raritan ConsoleSwitch SCS232 Small
form factor—1U
- Raritan ConsoleSwitch SCS232 Dual user
simultaneous access
- Raritan ConsoleSwitch SCS232 High port
density (32 ports), low cost per port
- Raritan ConsoleSwitch SCS232 data
buffers save last 8Kb (approximately 10 pages) of data output from
each device
- Raritan ConsoleSwitch SCS232
Out-of-band access to serial ports—does not rely on LAN/WAN
- With Raritan ConsoleSwitch SCS232
there are no inadvertent “break” signals to cause unintentional
rebooting
- Raritan ConsoleSwitch SCS232 has
convenient Category 5 UTP cable access
- Raritan ConsoleSwitch SCS232 is
Paragon Ready™ for seamless clustered access to devices
- Raritan ConsoleSwitch SCS232 is
software independent
- Raritan ConsoleSwitch SCS232 is
platform independent
- Raritan ConsoleSwitch SCS232 has
available flash firm upgrades
Click
here for a Free
Serial / Console Management Switch Project Evaluation
Raritan
ConsoleSwitch Downloads & Manuals
|
r
