APC PD40F6FK1-M
InfraStruXure Power Distribution Units
InfraStruXure PDU 40kW 208V/208V W/ MBP
Designed to increase flexibility and agility
of data center power distribution through a
design that does not require a raised floor
PD40F6FK1-M Features
- Load Test Port
Load test port provides simple
connection for full testing of a
Symmetra PX UPS
- Most sub-feed breakers per service
area
Power can be distributed both
effectively and efficiently.
- Wrap Around System Bypass
(3) Breaker maintenance bypass panel to
isolate the UPS from the critical load
- Two 42 Postion Power Panels
Provides breaker positions for
distribution to racks and power zones
- Top and bottom cable entry
(standard)
Flexibility that allows the customer to
decide - and at no extra cost.
APC InfraStruXure Power Distribution Units
(3-Phase 40, 60, 80, and 150 kW)
Configured to order, factory assembled power distribution
for Information Technology (IT) equipment in medium
to large data centers.
Increase availability in your data center with real-time
branch current monitoring and threshold settings for
local and advanced, remote notification. The configure-to-order
(CTO) process allows for factory installation and testing
of breakers, branch circuit monitoring boards, load-test
ports, and cut-to-size whips. The InfraStruXure PDU
can be deployed in environments without raised floors
for reduced installation costs and increased agility.
In addition, the ability to build an InfraStruXure PDU
to your exact specifications increases speed of deployment
and reliability, while lowering the total cost of ownership. |
APC PD40F6FK1-M PDU |
|
APC InfraStruXure PDU Alarm Thresholds
Current Transformers on each circuit that can provide
amp ratings on each circuit position to prevent circuit
breaker overloads.
APC InfraStruXure PDU Local and Web-based Monitoring
Status available to customers both in the data center
and remotely.
APC InfraStruXure PDU Remote Management Capabilities
Full-featured network management interfaces that
provide standards-based management via Web, SNMP, and
Telnet. Allows users to access, configure, and manage
units from remote locations to save valuable time. Associated
with this feature is the ability to quickly and easily
upgrade the firmware via network download to installed
units for future product enhancements.
APC InfraStruXure PDU Wide Range of Applications
Configure-to-order process allows APC to configure,
install, and test complete system before shipping.
APC InfraStruXure PDU Circuit Breaker Panel
Provides breaker positions for distribution to racks
and power zones.
APC InfraStruXure PDU System Mobility
PDU equipment can easily be relocated to accommodate
a changing data center environment.
Features of the InfraStruXure PDU
The APC InfraStruXure PDU provides power distribution
and management of electrical power to equipment racks.
You can manage the PDU through its Web interface, its
control console, the InfraStruXure Manager, or SNMP.
|
APC PDU's provides the following features:
- Connections for an Emergency Power Off (EPO)
switch.
- Input contact and relay output monitoring for
use with dry contact
sensors.
- Event and data log accessible by Telnet, FTP,
Secure CoPy (SCP),
serial connection, or a Web browser.
- E-mail notifications and SNMP traps based on
the severity level of
events.
|
