The ex-tend-it DVI-2000HD extends your dual link DVI
display up to 100 (330ft) meters away from your
source. Dual link DVI describes the use of all 24
pins of the DVI (digital visual interface) connector
to achieve super high resolutions.
Gefen DVI-2000HD Features:
- Uses a 8 strand multi mode LC fiber optic
cable
- Uses one CAT-5 cable for DDC and control
signals
- Extends any DVI compliant device up to 330‘
(100 meters) from the computer
- Saves space on your desktop and increases
productivity
- Eliminates computer noise where you work
- Support HDTV resolutions
- Supports up to 3840 x 2400 resolutions
- Supports DDWG standard for DVI compliant
monitors
- Installs in minutes
Gefen DVI-2000HD (rear view)
Gefen DVI-2000HD Specifications:
- Video Amplifier Bandwidth: 2 x 165 MHz
- Input Video Signal:1.2 volts p-p
- Input DDC Signal: 5 volts p-p (TTL)
- DVI Connector: Type DVI-D (24 pin)
- Link Connector: RJ-45
- Power Supply: 12 VDC
- Power Consumption: 15 Watts (max)
- Dimensions: 3.25”D x 4.25 ”W x 1”H
- Shipping Weight: 5 lbs.
- Note: For distances over 100 ft. shielded CAT-5
cable for video is recommended for optimal video
quality. The DDC CAT-5 cable does not need to be
shielded.
Gefen DVI-2000HD Diagram
How it works
The DVI-2000HDS sender unit sits next to your
computer, set-top box or DVD player source. Cables
supplied with the DVI-2000HD connect your DVI source
to the send unit. The DVI-2000HDR receive unit sits
next to your DVI display - up to 100 (330ft) meters
away. The display plugs into the back of the
receiver unit. One CAT-5 cable and multi mode LC
fiber optic cable (8 strand) connect the sender and
the receiver units to each other.
The DVI-2000HD is HDCP compliant.
The Gefen DVI-2000HD Package Includes:
- the DVI-2000HDS
- the DVI-2000HDR
- One 12v Power Supply
- One 6ft DVI-DL cable (M-M)
