| |
Dataprobe iBootBar
Multi-Outlet, Multi-User Remote Reboot with
outlet
grouping for simultaneous switching!
|
|
 |
Buy Online |
|
|
The Dataprobe iBootBar allows you to control each outlet
independently from Web, Telnet, SNMP. Have network access plus
out-of-band control via serial port and internal modem with both data
and DTMF tone dial control. Wherever you are, you are in complete
control.
iBootBar is available with single or dual power inlets. Dual power is
ideal for remote reboot control servers, routers, etc. with redundant
power supplies. Simultaneously switch both supplies off and on for
reboot, security or energy management. These models are also ideal for
switching higher current devices. Each inlet is distributed to 4
outlets, which can be switched in pairs for redundant systems, or
individually for higher current devices. Models are available for North
American 15 and 20 amp circuits.
The internal modem option allows connection to the iBootBar from
anywhere, anytime. Dial-in with a laptop or terminal for complete
control of all functions, or access iBootBar with any telephone for
quick power on, off or reboot functions. Telephone users are guided with
voice prompts and status information.
iBootBar continuously monitors the current draw from its outlets and
reports user settable high and low current alarms. Know immediately when
there is too much load, or a device stops working. Alarms are delivered
both by email and SNMP traps.
|
|
|
|
|
Dataprobe iBootBar Web Interface
The web browser interface provides the easiest means of managing
multiple outlets. One master unit can be connected to 15 expansion
units, managing 128 outlets from a single web page interface.
Multiple users, each with administrator assigned rights only see the
outlets they are responsible for.
Outlets can be linked together in logical groups, even across managed
units, to allow simultaneous power control or reboot with a single
command. Groups can also be used to link pairs of outlets together to
reboot devices with dual redundant power supplies.
In addition to the Web interface, the outlets can also be controlled via
Telnet, Serial, and SNMP.
|
|
|
|
|
iBootBar Features |
Dataprobe iBootBar
Benefits |
| Access from any Network point or any Telephone |
No field trips required for Reboot. Save time and money
by eliminating service calls and reducing downtime to a minimum. |
| Multiple Control Options |
Web: Intuitive Browser Interface
Telnet: Complete setup and control access
SNMP: Easy integration into network management systems
Serial: Out-of-band access
Internal Modem: Menu and DTMF dial tones |
| Multi-User |
Assign permissions to each user for outlets and
configuration. Users see only outlets assigned |
| IP Addressed, 10/100Base-T |
Use on any Ethernet IP network. Public or private.
Supports DHCP and alternate ports for Web Access |
| Automatic Reboot Operation |
Auto-Ping Automatic Operation for crashed devices.
Auto-Ping pings device and takes action when no response. Complete
control over frequency and timers. |
| Current Sensing and Alarms |
Know when critical power conditions occur and take
immediate action. Email and SNMP Trap notification.
|
| North American and International Versions |
115 VAC with N. American cords and plugs.
100-240VAC with IEC connections |
| Dual and Single Power Inlet |
Supports dual redundant powered devices with a single
click. |
| Group and Stagger |
Combine any outlets into logical groups and power up
devices in sequence to reduce power surges. |
| Direct TCP Messaging |
Integrate iBootBar into your OEM application with direct
TCP messaging protocol. Compatibility Mode for original iBB-N15 series
products. (requires firmware update to iBootBar Precision. See Resource
Tab) |
|
iBootBar
Tools |
| Operations Manuals |
Installation and Operations
Instructions |
Download
Now |
| SNMP MIB |
SNMP V1 |
Download
Now |
| Set-up Commands |
Operation and Set-up Syntax for Telnet and Serial Port |
Download
Now |
<tr> <td><b>FAQ</b></td> <td>Additional information and trouble shooting
guide</td> <td>Available Soon</td> </tr>
| Setup and Control Utility |
Administer Multiple iBootBars from one location (Req.
v1.2) |
Download
Now |
| Certificate Utility |
Generate and Install SSL Certificates (Req. v1.2) |
Download
Now |
| Upgrade Resources |
|
|
| Current Version |
Version 1.20.154 Inc. Uploader, Manual |
Download
Now |
| Pervious Versions |
Version 1.1d.103 |
Download
Now |
| |
Version 1.1c.97 |
Download
Now |
| |
Version 1.1b.80 |
Download
Now |
| Upgrade Procedures |
Instruction .pdf Included with complete package |
Download
Now |
|
Dataprobe iBootBar Specifications |
| Physical |
Height: 1U 1.75 in (4.5 cm)
Width: 19.0 in (48.25 cm)
Depth: 6.00 in (15.25 cm)
Weight: 7 lbs (3.25 Kg)
Temperature
Operating: 0 to 40 o C
Storage: -10 to 85 o C
Relative Humidity 0 to 95% Non-Condensing |
| A/C Input |
N15 Models: NEMA 5-15 Linecord 115VAC
15 Amps combined total switched per Linecord
Supplied with NEMA 5-15 Linecord, attached
N20 Models: NEMA 5-20 Linecord 115VAC
20 Amps combined total switched per Linecord
Supplied with NEMA 5-20 Linecord, attached |
|
Network
|
10/100 Ethernet
Web, Telnet, SNMP, SMTP
Port Assignable for Web and Telnet.
SSL on Web control |
| Serial Port |
D9 Serial, configured as DCE. to 115.2Kbps |
| Internal Modem Option |
56Kbps V.92 Global Compliance, Data or Tone Dial (DTMF)
control |
| Switched Outlets |
N15 Models: 8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 15 Amps Max Total per Linecord
N20 Models: 8 x NEMA 5-15 Receptical,
12 Amps Max per Receptical, 20 Amps Max Total per Linecord |
| |
TCP Messaging Protocol
Auto-Ping TCP Protocol
Heartbeat Detector Protocol |
| Compliance |
UL / cUL Listed
CE Marked
RoHS / WEEE Compliant
FCC Part 15 Class B |
|
|
|
|
