Avocent SPC420
Avocent SPC420V-1  Power Management

Avocent SPC420 Diagram

Combined with the Avocent CPS serial over IP network appliance, the SPC420 power control device delivers advanced power management and security:

• The Avocent SPC420 power control device provides enhanced security options, including password protection, access rights and port groupings.

• The Avocent CPS serial over IP solution adds authentication and multiple levels of data encryption for advanced user security.

Avocent SPC420 Description	Part Number	Price (USD)
4 Port Vertical 115V, 15A w/Nema 5-15P Plug & Nema 5-15R Outlets	SPC420V-1	$495
4 Port Vertical 208V, 15A w/Nema 6-15P Plug & IEC C-13 Outlets	SPC420V-2	$495

Avocent SPC420 Features and Benefits
The Avocent DSView 3 management software interface lets you easily associate server names with actual power outlet ports on the SPC power control device. Avocent DSView 3 software also allows grouping of dual-server power supplies as well as separating the power supplies on different power sources. This gives you true redundancy and control of dual-powered servers.

Note: Avocent DSView 3 software is sold separately.

• Intelligent Power Management. Individual, addressable power outlets let you remotely reboot devices from any location in the data center or across the globe.
• Integrated Power Management. Access to SPC power control device from Avocent DSView 3 software provides built-in support for servers with multiple power supplies and reduces the possibilities of inadvertently switching off the wrong server / target device.
• Ease of Use. Available in 4, 8 and 16-outlet models, with configurable port grouping and naming, multi-port commands and enhanced administration.
• On/Off Power Indicators. Avocent DSView 3 software lets you easily view the SPC devices power outlet on/off status without entering the server room/data center.
• Power-up Sequencing. Avoids branch circuit overload due to inrush current on powering-up the SPC appliance.
• Naming Associations. Users can create an association between a server name and specific SPC outlet port(s).
• Redundant Power Supply Configurations. Single connect and click power control of dual/multiple target devices that are powered from independent branch circuits/power sources.
• Security. In addition to port specific and command specific access control, the SPC power control device provides advanced user authentication and data encryption when combined with the Avocent CPS appliance.
• Energy Efficient. Power-on sequencing eliminates inrush current overload, which lets you maximize the number of devices on a single circuit.
• Click and Connect Access. When used with the Avocent DSView 3 software interface, the SPC device lets you access power to virtually any connected data center device.
• Local and Remote Power Load Measurement. Lets you hot plug additional SPC power control devices without the risk of overloading the branch circuit.

Avocent SPC420V-1 Specifications
Mechanical		Height	17.25 in (43.81 cm)
		Width	2.4 in. (6.09 cm)
		Depth	1.75 in. (4.45 cm)
		Weight	4 lbs. (1.81kg)
Environmental		Operating    Temp	5F (-15C) to 131F (55C)
		Storage  Temp	40F (-40C) to 185F (85C)
		Relative  Humidity	10% to 90% non condensing
Power		Operating  Voltage	100-120V or 208-240V
		Power  Frequency	50/60 Hz
		Input  Power	15 Amp versions (maybe de-rated to 13 Amp  depending upon local safety agencies)
		Power  Outlets	NEMA 5-20R, 100-120V  IEC 60320/C13, 208-240V
Supported Hardware		Computers	N/A
		Monitors	N/A
		Peripherals	N/A
Standards		Approved  Agency	US & Canada (cTUVus & FCC mark), European   Union (CE), Germany (GS), Japan (VCCI)