ATEN CE700 USB KVM Extender
The ATEN CE700 is a USB (Universal
Serial Bus) based KVM Extender that allows access to
a computer system from a remote USB console (USB keyboard,
monitor, and USB mouse).
Because it allows access to a computer system from a
remote console, the ATEN CE700 is perfect for use in
any type of installation where you need to place the
console where it is conveniently accessible, but you
want the system equipment to reside in a safe location
- away from the dust and dirt of the factory door, or
the harsh environmental influence of a construction
site, for example.
The ATEN CE700 is also useful for control and security
purposes, where you can have the system unit in a secure
area at the at the same time that you put the console
in the most convenient location for user access.
The ATEN CE700 improves on previous designs by: 1) using
inexpensive Category 5 cable (the kind commonly used
in ethernet networks), instead of bulkier, more expensive,
standard cables, for a much neater, more convenient,
more reliable data transfer connection; 2) it is able
to sense the distance to the system and automatically
adjusts the gain accordingly; and 3) it features a custom
ASIC to ensure the utmost in reliability and compatibility.
Setup is as easy as can be - simply connect the computer
system box and local console to the Local ATEN CE700
Module; run the Category 5 cable to the Remote ATEN
CE700 Module (up to 150 meters away); and plug the remote
console into the Remote Module.
Note: You can control numerous remote systems from a
single console by combining the ATEN CE700 with a USB
KVM switch.
ATEN CE700 Features
-
Category 5 Ethernet Cable to Connect the Local Remote
Units (Up to 150 meters apart)
-
Auto Signal Compensation (ASC)
-
USB Keyboard and USB Mouse Ports
-
Dual Console Operation - Control your System from
both the Local and Remote USB
-
Keyboard, USB Mouse, and Monitor Consoles
-
USB Overcurrent Detection and Prevention
-
Push Button Selection of the Active Console
-
High Resolution Video - Up to 1280 x 1024
-
Supports VGA, SVGA, and Multisync Monitors
-
Local Monitor supports DDC; DDC2; DDC2B
-
Hot Pluggable
ATEN CE700 Requirements
Consoles:
A VGA, SVGA, or Multisync monitor capable of the highest
resolution that you will be using on any computer in
the installation
A USB keyboard
A USB mouse
Computers:
A VGA, SVGA or Multisync card
USB Host Controller and Type A USB Port
ATEN CE700 Package Content
One (1) CE-700L USB Console Extender (Local Unit)
One (1) CE-700R USB Console Extender (Remote Unit)
One (1) CS Custom USB KVM Cable
Two (2) Power Adapters
One (1) User Manual
